GEESYS Technologies (India) Private Limited — Voltage Stabilizer
GEESYS Servo Controlled Voltage Stabilizer
Corrects Voltage Fluctuations before it damages your Hi-tech Machines.
The purpose of voltage stabilizer is to receive a fluctuating AC voltage of low or high amplitude & deliver an almost
constant voltage, at the output. The voltage variations, which have become a common phenomenon in power supply systems,
cause havoc in modern advanced electronic equipments. The voltage stabilizers are meant to take care of this problem.
They avoid breakdown, ensure longer life of the equipments & save in energy during high incoming voltages.
GEESYS Servo stabilizers are used to protect any critical equipment, which are effected by the fluctuation in the input
supply and those equipments do not operate when they are not used at the specified voltage. Our Servo Stabilizers
by providing constant output with tolerance of +/-1% makes equipments operate efficiently and hence improve their
life. Also protect from being damaged due to high and low voltage.
Why GEESYS is Preferred?
The use of variable speed servo motor along with proportional type of control circuit ensures that the voltage fluctuations are corrected quickly without any oscillations at the output so as to protect the end equipment. Hunting, oscillation, and noise generation is eliminated.
The rate of voltage correction is 2-3 times faster than our competitors.
Designed to work on Unbalanced Line & Load conditions wherein each phase is individually controlled with separate variable speed Motor & Electronic Controls.
The response time of stabilizer quick at 10 msec.
The improved efficiency of 98% compared to typical 95% available in the market will reduce running costs. Substantial saving in the electric bill (lower power losses) will pay back the cost of equipment in 2/3 years.
Main Functional Features of Solar Charge Controllers:
No wave form Distortion
Speed of correction up to 35 V /Sec
Response time < 20Sec
Immune to Load PF & supply frequency variations
Power loss – 2% Max
Duty Cycle continuous
Very High Reliability
Easy & Simple maintenance
Compliance to International Standards
Field programmable servo parameters including correction accuracy using push button and LCD.
Phase reversal/single phasing protection.
Real time correction.
As the correction is done based on real time signal measurement, the servo will be stable even in non sinusoidal environments.
Field Programmable 3 stage TRIP and trip delay for low voltage, high voltage and overload.
Event Logging, Details of last trip is capture and stored in EEPROM. Elapsed time also displayed for evaluating the cause.
User friendly HMI.
Field programmable servo parameters and are stored in NV memory.
independent output voltage setting.
As the servo parameters are stored in Non-volatile memory, the servo parameters will be retained forever.
The servo parameters like regulation voltage, high cutoff, low cutoff and overload cutoff can be configured in the field without switching off the servo and without disturbing the Hardware.
In the conventional analogue board all the servo parameters are configured with variable resistors. The resistance may change on ageing, which affects the servo configuration. In ServoLite all the parameters are stored digitally in the Non-volatile memory.
Three Stage Trip is one of the salient advantages over conventional analogue board. All the cutoffs can be configured in three stages.
This will be very useful in the overload cutoff. For the inductive load the starting current will be more. In the analogue board the over load cutoff is configured in such a way to accommodate the staring current. So the purpose of the overload cutoff shall not be met. But here in servo Lite, over load can be differentiated from the starting current as below.
GEESYS - M122448
12V; 24V; 48V;
Own Power Consumption
Rated Charging Current
10A; 20A; 30A; 40A; 50A; 60A;
Rated Load Current
10A; 20A; 30A; 40A; 50A; 60A;
Voltage Drop of Charge Circuit
Voltage Drop of Load Circuit
Equalization Charge Voltage
(Used only when battery is deep discharged)
Buck Charge Voltage
Float Charge Voltage
-20'C ~ +55'C
Dimensions L x B x H
Medical equipments Shopping Malls
Residential and commercial
GEESYS Technologies (India) Private Limited — Expert in General Electrical and Electronics System