15kva-single-phase-servo-stabilizer

Backed by rich industry experience and knowledge, we have been able to manufacture and supply a broad Range of Servo Voltage Stabilizer.Corrects Voltage Fluctuations before it damages your Hi-tech Machines.The purpose of voltage stabilizer is to receive a fluctuating AC voltage of low or high amplitude & deliver an almost constant voltage, at the output. The voltage variations, which have become a common phenomenon in power supply systems, cause havoc in modern advanced electronic equipments. The voltage stabilizers are meant to take care of this problem. They avoid breakdown, ensure longer life of the equipments& save in energy during high incoming voltages.

GEESYS Servo stabilizers are used to protect any critical equipment, which are effected by the fluctuation in the input supply and those equipments do not operate when they are not used at the specified voltage. Our Servo Stabilizers by providing constant output with tolerance of +/-1% makes equipments operate efficiently and hence improve their life. Also protect from being damaged due to high and low voltage.

Series:	String Shield
Dispatches:	Between 10-15 Days
Price:	INR 25000/-* Onwards

Introduction

Every inverter and charge controller, whether in a utility-interactive or stand-alone system, has a DC input voltage window that must be adhered to. In batteryless grid-tied systems, inverters require relatively high DC input voltages, from 90 to 850V (typically 4 to 26 modules wired in series).

-->

Small grid-tied PV systems (less than 5 kW @ 600V DC) often have only one or two series strings of modules. GEESYS Team will configure the SJB based on the Inverter’s technical specification and Solar PV modules technical specification. A combiner box offers a place to house series fuses and parallel the series string inputs, reducing the number of array output wires needed to run to the inverter location.

Some grid-direct inverter manufacturers include series fusing within the inverter or its attached disconnect box, which may eliminate the need for a separate combiner box. However, using a PV combiner box located close to the PV array gives you easy access to the wires for each series string. This can be handy for troubleshooting a malfunctioning PV array without having to run back and forth to the inverter area.

Features

All GEESYS Solar DCDBs satisfies IEC-61439-1 and as mandated by MNRE and operates up to 1500VDC.
The enclosure provides IP65 protection
Satisfies complete electrical safety to avoid hazards.
Branded DC Fuses to prevent overloads.
Reverse blocking diodes for reverse current flow protection.
User-friendly DC termination and decent cable management.
Easy cable plug-in and plug-out provision for cable connection.
Wall mounting design for easy installation and maintenance.

Technical Specifications

General Data			DC Surge Arrester
	Model No.		Brand	GEESYS
	Input	1 String	Additional Features	IEC 61643 - 11 Compliance
	Output	1 String	Included Components	Enclosure Material - Thermoplastic UL 94-V0
	Maximum voltage	1000 V	Number of SPD	1 no.
	Max DC SC (Isc)	15 A	Max Current Output	32 A
Enclosure			DC Fuse holder
	Material type	Polycarbonate	Rated working Voltage	1000 V
	Degree of protection	IP 66/67	Fuse Link	10 x 38 mm , 15A
	Degree of resistance to impacts	IK 07	Cable Input Entry	PG7
	Dimention	180x 180x100mm	Cable Output Gland	PG7/PG 11
Terminal block			Environment
	Size	6 Sqmm	Operation temperature	-20 'C to +60'C
	Make	Connectwell	Humidity	99 %
	Material type	PCC	Altitude	2000 M
	insulation in flammability test	IEC-60997-7-6	Installation	Wall Mounting

Applications

Solar PV Power Plants

Documents

Catalogue	Format	Size	Date
Servo Controlled Voltage Stabilizer(3KVA-350KVA)	PDF	215kB	21Jun2019
RESIDENTIAL SYSTEM Model	PDF	215kB	21Jun2019
User Guide
Warranty Terms & Conditions	PDF	326.2 kB	21Jun2019

FAQs

1.Do solar PV panels need maintenance?

Solar panels generally require very little maintenance in order to function. The only thing they need is a periodic light cleaning to make sure dirt, leaves, and other debris aren't obstructing the sun's rays

2.What is DC Distribution Box?

The DC Distribution Box is used to provide flexibility for the operator of the solar power plant to disconnect and connect both the inward solar supply and battery terminals. Here an MCCB and a fuse of proper rating depending upon the capacity of the power plant and the battery bank are used.